Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET1987S10/T10 P/U 4WD V6-173 2.8LREPAIR AND DIAGNOSISSPECIFICATIONSMECHANICAL SPECIFICATIONSENGINECYLINDER BLOCK ASSEMBLYPISTON PIN, ENGINE
1987 Chevrolet S10/T10 P/U 4WD V6-173 2.8L
Piston Pin, Engine
1987 Chevrolet S10/T10 P/U 4WD V6-173 2.8LSECTION Piston Pin, Engine
PISTON PIN
Diameter 22.9937 - 23.0015 mm (0.9052 - 0.9055 in)
Clearance 0.0065 - 0.0091 mm (0.00026 - 0.00036 in)
Fit In Rod 0.0187 - 0.0515 mm (0.00073 - 0.00202 in) Press
Diameter 22.9937 - 23.0015 mm (0.9052 - 0.9055 in)
Clearance 0.0065 - 0.0091 mm (0.00026 - 0.00036 in)
Fit In Rod 0.0187 - 0.0515 mm (0.00073 - 0.00202 in) Press
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.