Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET1987S10/T10 BLAZER 4WD V6-173 2.8LREPAIR AND DIAGNOSISSPECIFICATIONSCAPACITY SPECIFICATIONSMAINTENANCETRANSAXLE/TRANSMISSION, AUTOMATIC
1987 Chevrolet S10/T10 Blazer 4WD V6-173 2.8L
Transaxle/Transmission, Automatic
1987 Chevrolet S10/T10 Blazer 4WD V6-173 2.8LSECTION Transaxle/Transmission, Automatic
Type AF
CAPACITY, Initial Refill*:
180C 3L30 2.8 Liters 3.0 Quarts
700-R4 4L60, 4L160E 4.7 Liters 5.0 Quarts
***With the engine at operating temperature, shift transmission through all gears. Check fluid level in PARK and add fluid as needed
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.