Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET1987R 30 P/U 2WD V8-379 6.2L DSLREPAIR AND DIAGNOSISTRANSMISSION AND DRIVETRAINAUTOMATIC TRANSMISSION/TRANSAXLESERVICE AND REPAIROVERHAUL700-R4 AUTOMATIC TRANSMISSIONCASE & INTERNAL COMPONENTSREACTION SUN GEAR & SHELL
1987 Chevrolet R 30 P/U 2WD V8-379 6.2L DSL
Reaction Sun Gear & Shell
1987 Chevrolet R 30 P/U 2WD V8-379 6.2L DSLSECTION Reaction Sun Gear & Shell
1. Inspect reaction sun gear for the following:
a. Nicked, scored or worn bushing.
b. Damaged spline or teeth.
c. Loose or weak retaining ring.
2. Inspect reaction sun shell for stripped or worn splines, broken hub or bent tangs.
3. Inspect lo and reverse inner race to reaction sun gear shell thrust washer for wear or damage.
4. Inspect reaction shaft to reaction sun gear shell thrust washer for wear or damage.
5. Install reaction sun gear retainer ring onto the reaction sun gear, if previously removed.
6. Install reaction sun gear into reaction carrier while aligning teeth with pinion gears.
7. Install thrust washer onto the lo and reverse inner race.
8. Install reaction gear shell onto reaction sun gear.
9. Install bronze thrust washer onto the reaction sun shell.
a. Nicked, scored or worn bushing.
b. Damaged spline or teeth.
c. Loose or weak retaining ring.
2. Inspect reaction sun shell for stripped or worn splines, broken hub or bent tangs.
3. Inspect lo and reverse inner race to reaction sun gear shell thrust washer for wear or damage.
4. Inspect reaction shaft to reaction sun gear shell thrust washer for wear or damage.
5. Install reaction sun gear retainer ring onto the reaction sun gear, if previously removed.
6. Install reaction sun gear into reaction carrier while aligning teeth with pinion gears.
7. Install thrust washer onto the lo and reverse inner race.
8. Install reaction gear shell onto reaction sun gear.
9. Install bronze thrust washer onto the reaction sun shell.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.