Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET1987CHEVETTE L4-98 1.6LREPAIR AND DIAGNOSISSPECIFICATIONSMECHANICAL SPECIFICATIONSBRAKE MASTER CYLINDER
1987 Chevrolet Chevette L4-98 1.6L
Brake Master Cylinder
1987 Chevrolet Chevette L4-98 1.6LSECTION Brake Master Cylinder
TORQUE SPECIFICATIONS:
Tube Nuts 11 Nm (8.0 ft. lb.)
Master Cylinder Attaching Nuts 17 Nm (150 in. lb.)
GENERAL SPECIFICATIONS:
Master Cylinder Bore Diameter 22.2 mm (0.874 in.)
Tube Nuts 11 Nm (8.0 ft. lb.)
Master Cylinder Attaching Nuts 17 Nm (150 in. lb.)
GENERAL SPECIFICATIONS:
Master Cylinder Bore Diameter 22.2 mm (0.874 in.)
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.