Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET1987CHEVETTE L4-98 1.6LPARTS AND LABORTRANSMISSION AND DRIVETRAINMANUAL TRANSMISSION/TRANSAXLEOVERDRIVE ASSEMBLYLABOR TIMES
1987 Chevrolet Chevette L4-98 1.6L
Overdrive Assembly: Labor Times
1987 Chevrolet Chevette L4-98 1.6LSECTION Labor Times
| Standard Hours | Manufacturer Warranty Hours | Skill Level | Notes | |
| Replace | ||||
| 4 Speed | ||||
| Note | ||||
| With Folding Top, Add | 0.7 | 0.4 | A | |
| Overhaul/Rebuild | ||||
| 4 Speed | ||||
| Note | ||||
| With Folding Top, Add | 0.7 | 0.4 | A | |
| To Replace Adapter and/or Seal, Add | 0.8 | 0.5 | A | |
| To Recondition Piston | ||||
| Accumulator and/or Seal, Add | 0.9 | 0.6 | A | |
| To Recondition Planetary Carrier Gear ASSY, Add | 1.4 | 1.0 | A | |
| To Recondition Direct | ||||
| Clutch, Overdrive Clutch, Add | 1.7 | 1.2 | A | |
| To Replace Output Shaft, Add | 2.1 | 1.5 | A | |
| To Replace Speedometer Drive Gear, Add | 1.7 | 1.2 | A | |
| To Recondition Oil Pump, Add | 2.1 | 1.5 | A | |
| To Replace Case, Add | 2.5 | 1.8 | A |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.