Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET1986S10/T10 P/U 4WD L4-151 2.5LREPAIR AND DIAGNOSISDIAGRAMSEXPLODED VIEWSAUTOMATIC TRANSMISSION/TRANSAXLE
1986 Chevrolet S10/T10 P/U 4WD L4-151 2.5L
Automatic Transmission/Transaxle
1986 Chevrolet S10/T10 P/U 4WD L4-151 2.5LSECTION Automatic Transmission/Transaxle
Refer to the "Service Bulletins" section prior to performing the following procedures.
Refer to Figs. 1 and 4 during subassembly service and transmission assembly procedures.
Fig. 1, Transmission case & external parts exploded view (Part 1 of 2). 1986 Models:
Fig. 1, Transmission case & external parts exploded view (Part 2 of 2). 1986 Models:
Fig. 4, Transmission internal parts exploded view (Part 1 of 2):
Fig. 4, Transmission internal parts exploded view (Part 2 of 2):
Refer to Figs. 1 and 4 during subassembly service and transmission assembly procedures.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.