Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET1986K 10 P/U 4WD V6-262 4.3LREPAIR AND DIAGNOSISSPECIFICATIONSMECHANICAL SPECIFICATIONSDISTRIBUTOR, IGNITION
1986 Chevrolet K 10 P/U 4WD V6-262 4.3L
Distributor, Ignition
1986 Chevrolet K 10 P/U 4WD V6-262 4.3LSECTION Distributor, Ignition
| Distributor Number | 1103572 Note: Exc. California & high altitude. | 1103573 Note: California. | 1103631 Note: High Altitude. | |
| Rotation Note: As viewed from top: C, clockwise; CC, counterclockwise. | C | C | C | |
| Centrifugal Advance | Advance Starts | 0 at 800 Degrees At RPM (deg @ rpm) | --- | 0 at 800 Degrees At RPM (deg @ rpm) |
| Full Advance | 9 at 2000 Degrees At RPM (deg @ rpm) | --- | 9 at 2000 Degrees At RPM (deg @ rpm) | |
| Vacuum Advance | Vacuum To Start Plunger | 3 Inch Of Mercury (in Hg) | --- | 3 Inch Of Mercury (in Hg) |
| Maximum Advance | 10 at 7.5 Degrees At RPM (deg @ rpm) | --- | 8 at 6.5 Degrees At RPM (deg @ rpm) |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.