Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET1985C 10 P/U 2WD V8-305 5.0LREPAIR AND DIAGNOSISSPECIFICATIONSMECHANICAL SPECIFICATIONSBRAKE ROTOR/DISC
1985 Chevrolet C 10 P/U 2WD V8-305 5.0L
Brake Rotor/Disc
1985 Chevrolet C 10 P/U 2WD V8-305 5.0LSECTION Brake Rotor/Disc
Rotor Thickness
GM brake systems are identified by Regular Production Option (RPO) codes. For further information on RPO codes see Application and ID.
GM brake systems are identified by Regular Production Option (RPO) codes. For further information on RPO codes see Application and ID.
| RPO JB1, JB3 | RPO JB5, JB6, JB7, JD3, JD5 | RPO JB8, JF9 | |
| Nominal Thickness | 1.04 Inch (in) | 1.28 Inch (in) | 1.53 Inch (in) |
| Minimum Refinish Thickness | 0.98 Inch (in) | 1.23 Inch (in) | 1.48 Inch (in) |
| Discard Thickness | 0.965 Inch (in) | 1.215 Inch (in) | 1.465 Inch (in) |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.