Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET1982CITATION V6-173 2.8L VIN X 2-BBLREPAIR AND DIAGNOSISSPECIFICATIONSMECHANICAL SPECIFICATIONSALIGNMENT
1982 Chevrolet Citation V6-173 2.8L VIN X 2-bbl
Alignment
1982 Chevrolet Citation V6-173 2.8L VIN X 2-bblSECTION Alignment
CASTER Not adjustable
CAMBER [1] 0 degrees +/- 0.5 degrees
TOE-IN [2]
mm (per wheel) 0 mm +/- 0.5 mm
degrees (per wheel) 0 degrees +/- 0.1 degrees
[1] Left and right side must be equal within 0.5 degrees.
[2] Left and right side set separately with steering wheel set in straight ahead position (+/- 5 degrees).
CAMBER [1] 0 degrees +/- 0.5 degrees
TOE-IN [2]
mm (per wheel) 0 mm +/- 0.5 mm
degrees (per wheel) 0 degrees +/- 0.1 degrees
[1] Left and right side must be equal within 0.5 degrees.
[2] Left and right side set separately with steering wheel set in straight ahead position (+/- 5 degrees).
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.