Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET1982CITATION L4-151 2.5LREPAIR AND DIAGNOSISTRANSMISSION AND DRIVETRAINAUTOMATIC TRANSMISSION/TRANSAXLESERVICE AND REPAIRPROCEDURESDETENT/T.V. CABLE ADJUST
1982 Chevrolet Citation L4-151 2.5L
Detent/T.V. Cable Adjust
1982 Chevrolet Citation L4-151 2.5LSECTION Detent/T.V. Cable Adjust
NOTE: On vehicles equipped with diesel engine, remove the injection pump rod from throttle lever before adjusting cable.
1. Depress and hold metal lock tab.
2. Move slider back through fitting in direction away from throttle idler lever until slider stops against fitting, then release lock tab.
3. Rotate throttle idler lever to full travel stop position.
1. Depress and hold metal lock tab.
2. Move slider back through fitting in direction away from throttle idler lever until slider stops against fitting, then release lock tab.
3. Rotate throttle idler lever to full travel stop position.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.