Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET1982CITATION L4-151 2.5LREPAIR AND DIAGNOSISENGINE, COOLING AND EXHAUSTENGINECYLINDER HEAD ASSEMBLYVALVE SPRINGSPECIFICATIONS
1982 Chevrolet Citation L4-151 2.5L
Valve Spring: Specifications
1982 Chevrolet Citation L4-151 2.5LSECTION Specifications
| Valve Spring Free Length | 2.08 Inch (in) |
| Valve Spring Installed Height | 1.66 Inch (in) |
| Seat Pressure | 78-86 at 1.66 Pound Force At Inch (lbf @ in) |
| Compressed Pressure | 122-180 at 1.25 Pound Force At Inch (lbf @ in) Note: 1985-86, 170-180 lbs. @1.26 inches. |
| Out Of Square Limit | 0.062 Inch (in) |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.