Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET1982CITATION L4-151 2.5LREPAIR AND DIAGNOSISBODY AND FRAMELOCKSTRUNK / LIFTGATE LOCKTECHNICAL SERVICE BULLETINSLOCK CYLINDERS - INOPERATIVE/PROPER LUBRICANT USAGE
1982 Chevrolet Citation L4-151 2.5L
Lock Cylinders - Inoperative/Proper Lubricant Usage
1982 Chevrolet Citation L4-151 2.5LSECTION Lock Cylinders - Inoperative/Proper Lubricant Usage
86-15
10
DEC., 1985
Subject: LUBRICATION OF LOCK CYLINDER-DOOR, DECK LID AND FUEL DOOR
Model and Year: ALL MODELS
TO: ALL CHEVROLET DEALERS
Door, deck lid and fuel filler lock cylinders are being returned from the field, due to customer comments of a binding or inoperative condition which is due to lack of lubrication, caused by the use of penetrating oils. These penetrating oils do not lubricate the cylinders but wash out the factory installed lubricant. Penetrating oils are not to be used in any lock cylinders. Also materials, including silicone, which contain chlorinated propellants are not to be used on black plastic cylinders. The chlorine attacks the plastic. Further, lock de-icers which contain alcohol to remove the moisture from the cylinders, additionally tend to cut the existing lubricants.
To maintain proper lubrication of lock cylinders it is recommended that a light oil or graphite lubricant be used such as LOCK-EASE* or equivalent, and particularly so if a lock de-icer was previously necessitated.
10
DEC., 1985
Subject: LUBRICATION OF LOCK CYLINDER-DOOR, DECK LID AND FUEL DOOR
Model and Year: ALL MODELS
TO: ALL CHEVROLET DEALERS
Door, deck lid and fuel filler lock cylinders are being returned from the field, due to customer comments of a binding or inoperative condition which is due to lack of lubrication, caused by the use of penetrating oils. These penetrating oils do not lubricate the cylinders but wash out the factory installed lubricant. Penetrating oils are not to be used in any lock cylinders. Also materials, including silicone, which contain chlorinated propellants are not to be used on black plastic cylinders. The chlorine attacks the plastic. Further, lock de-icers which contain alcohol to remove the moisture from the cylinders, additionally tend to cut the existing lubricants.
To maintain proper lubrication of lock cylinders it is recommended that a light oil or graphite lubricant be used such as LOCK-EASE* or equivalent, and particularly so if a lock de-icer was previously necessitated.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.