Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET1982CHEVETTE L4-98 1.6LREPAIR AND DIAGNOSISSPECIFICATIONSMECHANICAL SPECIFICATIONSENGINECYLINDER HEAD ASSEMBLYVALVE, INTAKE/EXHAUSTVALVE SPECIFICATIONS
1982 Chevrolet Chevette L4-98 1.6L
Valve Specifications
1982 Chevrolet Chevette L4-98 1.6LSECTION Valve Specifications
| Stem Diameter Intake | 0.3138-0.3144 Inch (in) |
| Stem Diameter Exhaust | 0.3130-0.3136 Inch (in) |
| Valve Installed Height | 0.70866 Inch (in) |
| Face Angle | 46 Degrees (deg) |
| Margin | 0.031 Inch (in) |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.