Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET1982CHEVETTE L4-111 1.8L DSLREPAIR AND DIAGNOSISHEATING AND AIR CONDITIONINGCOMPRESSOR HVACCOMPRESSOR SHAFT SEALTECHNICAL SERVICE BULLETINSA/C COMPRESSOR SEAL WASHER - REFERENCE CHART
1982 Chevrolet Chevette L4-111 1.8L DSL
A/C Compressor Seal Washer - Reference Chart
1982 Chevrolet Chevette L4-111 1.8L DSLSECTION A/C Compressor Seal Washer - Reference Chart
File In Section: 1 - HVAC
Bulletin No.: 63-12-15
Date: November, 1996
INFORMATION
Subject:
Reference Chart for A/C Compressor Seal Washers
Models:
1997 and Prior Passenger Cars (Except Corvette and GEO) 1997 and Prior Light Duty Trucks (Except Tracker)
GMSPO A/C compressors include a seal washer kit. These kits contain various color edge painted washer seals and inserts in which only two (2) washers and possibly one (1) insert are used. It has come to our attention that some packaging discrepancies were found and some of the seals cannot be properly identified for installation.
These seals are very close in size and some of the seals were inadvertently edge painted the wrong color or not painted.
The chart shown will help to properly identify the seals. Use the chart by placing the seal over the pictured seal to identity inside and outside diameters and thickness. Because these seals are very similar in size, specifications are also listed in the chart.
Important:
If seals are damaged upon installation, obtain new seal kit. Seals will be available separately at a later date.
Bulletin No.: 63-12-15
Date: November, 1996
INFORMATION
Subject:
Reference Chart for A/C Compressor Seal Washers
Models:
1997 and Prior Passenger Cars (Except Corvette and GEO) 1997 and Prior Light Duty Trucks (Except Tracker)
GMSPO A/C compressors include a seal washer kit. These kits contain various color edge painted washer seals and inserts in which only two (2) washers and possibly one (1) insert are used. It has come to our attention that some packaging discrepancies were found and some of the seals cannot be properly identified for installation.
These seals are very close in size and some of the seals were inadvertently edge painted the wrong color or not painted.
The chart shown will help to properly identify the seals. Use the chart by placing the seal over the pictured seal to identity inside and outside diameters and thickness. Because these seals are very similar in size, specifications are also listed in the chart.
Important:
If seals are damaged upon installation, obtain new seal kit. Seals will be available separately at a later date.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.