Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET1982CELEBRITY L4-151 2.5LREPAIR AND DIAGNOSISWIPER AND WASHER SYSTEMSWIPER MOTORSERVICE AND REPAIR
1982 Chevrolet Celebrity L4-151 2.5L
Wiper Motor: Service and Repair
1982 Chevrolet Celebrity L4-151 2.5LSECTION Service and Repair
1. Raise hood, then remove right and left wiper arm and blade assemblies.
2. Remove shroud grille to body attaching screws, then shroud grille.
3. Loosen, but do not remove nuts securing transmission drive link to motor crank arm, then disconnect drive link.
4. Disconnect wiring connectors and washer hoses.
5. Remove 3 screws attaching wiper motor to firewall.
6. Remove motor while guiding crank arm through hole.
7. Reverse procedure to install. Motor must be in ``Park'' position before assembling transmission drive link to crank arm. Torque transmission drive link to 48---75 in. lbs.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.