Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET1982CAVALIER L4-112 1.8LREPAIR AND DIAGNOSISTRANSMISSION AND DRIVETRAINMANUAL TRANSMISSION/TRANSAXLESERVICE AND REPAIROVERHAULASSEMBLETRANSAXLE CASE END PLATE
1982 Chevrolet Cavalier L4-112 1.8L
Transaxle Case End Plate
1982 Chevrolet Cavalier L4-112 1.8LSECTION Transaxle Case End Plate
Refer to accompanying image for transaxle gear case end plate components.
1. Apply sealant No. 1052943 or equivalent to outside end plate (90) bolt hole pattern of case.
2. Install shim (87).
3. Install end cover plate (90).
4. Install attaching bolts (91). Torque attaching bolts to 15 ft lbs.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.