Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET1982CAVALIER L4-112 1.8LREPAIR AND DIAGNOSISLIGHTING AND HORNSBRAKE LIGHT SWITCHADJUSTMENTS
1982 Chevrolet Cavalier L4-112 1.8L
Brake Light Switch: Adjustments
1982 Chevrolet Cavalier L4-112 1.8LSECTION Adjustments
Insert stoplight switch into tubular clip until switch body seats fully into clip. Pull brake pedal rearward against internal pedal stop. The switch will be properly positioned in the tubular clip automatically. Rotate switch 1/2 turn counterclockwise to be sure that switch does not hold brake pedal down after adjustment.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.