SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET1982CAMARO V8-305 5.0L VIN H 4-BBLREPAIR AND DIAGNOSISSTARTING AND CHARGINGSTARTING SYSTEMNEUTRAL SAFETY SWITCHSERVICE AND REPAIR
1982 Chevrolet Camaro V8-305 5.0L VIN H 4-bbl

Neutral Safety Switch: Service and Repair

1982 Chevrolet Camaro V8-305 5.0L VIN H 4-bblSECTION Service and Repair

CAMARO & 1984---88 CORVETTE

1. Remove floor console cover, then disconnect electrical connectors from switch.
2. Place shift lever in ``Neutral'' position of detent plate, then remove switch attaching screws and switch.
3. To install, ensure that the shift lever is in ``Neutral,'' then position switch on shift lever making sure pin on shaft is in slot of switch.
4. Install attaching screws and torque to 16 inch lbs.
5. Move shift lever out of ``Neutral'' to shear pin which is part of new switch.
6. Reconnect electrical connectors to switch, then apply parking brake and start engine. Check back-up lights and seat belt warning system for proper operation and ensure that engine will start only in ``Park'' or ``Neutral.''
7. Turn ignition off and install floor console.



RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.