Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCADILLAC2013CTS WAGON AWD V6-3.0LREPAIR AND DIAGNOSISSPECIFICATIONSMECHANICAL SPECIFICATIONSENGINETIMING COVER
2013 Cadillac CTS Wagon AWD V6-3.0L
Timing Cover
2013 Cadillac CTS Wagon AWD V6-3.0LSECTION Timing Cover
Engine Front Cover Bolt - M6 15 Nm (11 lb ft)
Engine Front Cover Bolt - M8
First Pass 20 Nm (14 lb ft)
Second Pass 20 Nm (14 lb ft)
Final Pass 60 Degrees
Engine Front Cover Bolt - M12 65 Nm (48 lb ft)
Engine Front Cover Studs 15 Nm (11 lb ft)
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.