Automatic Door Locks

2002 Cadillac Eldorado V8-4.6L VIN YSECTION Automatic Door Locks
Continue with the following steps in order to personalize the automatic door locks:
1. The DIC displays DOORS UNLOCK KEY OFF.
2. Press the TRIP RESET button in order to display FEATURE ON or press the INFO RESET button in order to display FEATURE OFF.
3. Press the SKIP INFO button in order to advance to the next option.
4. The DIC displays DOORS LOCK IN GEAR.
5. Press the TRIP RESET button in order to display FEATURE ON or press the INFO RESET button in order to display FEATURE OFF.
6. Press the SKIP INFO button in order to advance to the next option.
7. If the previous choice was DOORS LOCK IN GEAR FEATURE ON, the DIC displays DRIVER UNLOCK IN PARK.
8. Press the TRIP RESET button in order to display FEATURE ON or press the INFO RESET button in order to display FEATURE OFF.
9. Press the SKIP INFO button in order to advance to the next option.
10. If the previous choice was DRIVER UNLOCK IN PARK FEATURE OFF, the DIC displays DRIVER UNLOCK KEY OFF.
11. Press the TRIP RESET button in order to display FEATURE ON or press the INFO RESET button in order to display FEATURE OFF.
12. Press the SKIP INFO button in order to advance to the next option.
13. If the previous choice was DRIVER UNLOCK KEY OFF FEATURE OFF, the DIC displays DOORS UNLOCK KEY OFF.
14. Press the TRIP RESET button in order to display FEATURE ON or press the INFO RESET button in order to display FEATURE OFF.
15. Press the SKIP INFO button in order to advance to the next option.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.