Wheel Alignment Specifications

2002 Cadillac Eldorado V8-4.6L VIN YSECTION Wheel Alignment Specifications
Front Caster 2.3
+/- 1.0 deg
Cross Caster (LH-RH) 0
+/- 1.0 deg
Camber 0
+/- 0.5 deg
Cross Camber (LH-RH) 0
+/- 0.75 deg
Sum Toe (LH-RH) 0.2
+/- 0.2 deg
Steering Wheel Angle 0
+/- 2.5 deg
Toe (per wheel) 0.1
+/- 0.1 deg
Rear Caster -
Cross Caster (LH-RH) -
Camber 0
+/- 0.5 deg
Cross Camber (LH-RH) 0
+/- 0.75 deg
Sum Toe (LH-RH) 0.2
+/- 0.2 deg
Steering Wheel Angle -
Toe (per wheel) 0
+/- 0.1 deg
Ride Height D 1.14 inch
Z 1.97 inch
J 8.66 inch
K 8.43 inch
P 28.15 inch
R 27.91 inch
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.