Sunload Sensor Replacement

2002 Cadillac Eldorado V8-4.6L VIN YSECTION Sunload Sensor Replacement
SUN LOAD SENSOR REPLACEMENT

REMOVAL PROCEDURE




1. Remove the windshield defroster grille (1) by lifting upward.
2. Disconnect the electrical connector (3) from the sun load sensor (2).
3. Remove the sun load sensor (2).

INSTALLATION PROCEDURE




1. Secure the sensor (2) to the defroster grille.
2. Connect the electrical connector (3).
3. Install the windshield defroster grille (1) by snapping into place.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.