Memory Seats Programming

2002 Cadillac Eldorado V8-4.6L VIN YSECTION Memory Seats Programming
Perform the following actions in order to program the memory seats for two different drivers:
1. Move the seat and the sideview mirrors to the desired positions.
2. Press and hold the correct memory seat button for the driver until you hear two beeps.
3. Move the seat to the desired EXIT position.
4. Press and hold the EXIT button until you hear two beeps.
5. Repeat steps 1 though 4 for the other driver.

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.