Scan Tool Data Definitions

2002 Cadillac Eldorado V8-4.6L VIN YSECTION Scan Tool Data Definitions
GPS Information - second: Gives second of current time as transmitted by GPS satellites.

GPS Information - Minute: Gives current minute as transmitted by GPS satellites.

GPS Information - Hour: Gives hour of current time as transmitted by GPS satellites.

GPS Information Day: Gives current day as transmitted by GPS satellites

GPS Information - Month: Gives current month as transmitted by GPS satellites.

GPS Information - Year: Gives current year as transmitted by GPS satellites.

GPS Information -- Latitude: Gives current position (N/S) in degrees as calculated from GPS satellite information.

GPS Information - Longitude: Gives current position (E/W) in degrees as calculated from GPS satellite information.

Module Information - Component Serial #8-11: This is the first partition of the serial number.

Module Information - Component Serial #12: This is the second partition of the serial number.

Module Information - Component Serial #13-16: This is the third partition of the serial number.

Module Information - Component Serial #17-18: This is the last partition of the serial number.

Module Information - 3 Watt Transmitter ID: This displays the part number for the transmitter.

Module Information - 8-Digit GM Part Number: This displays the part number for the VIU.

Module Information - Julian Date Of Build: This displays the day of the year the module was built.

Module Information - Master Flash ROM ID: This displays the calibration or program revision level used in the Master ROM.

Module Information - PROM ID: This displays the 4-digit number of the PROM incorporated into the driver door module (DDM).

Module Information - Year Module Built: This displays the 4-digit year of build.

Module Information 2 - Electronic Serial Number: This displays the 6-8 digit numeric order in which the module was built.

Module Information 2 - VIU Station ID: This displays an alpha-numeric ID of the VIU manufacturing station.

Slave Flash ROM ID: This displays the calibration or program revision level used in the Slave ROM.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.