Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCADILLAC1999SEVILLE SLS V8-4.6L VIN YREPAIR AND DIAGNOSISSPECIFICATIONSMECHANICAL SPECIFICATIONSENGINECYLINDER BLOCK ASSEMBLYCONNECTING ROD, ENGINEENGINE MECHANICAL SPECIFICATIONS
1999 Cadillac Seville SLS V8-4.6L VIN Y
Engine Mechanical Specifications
1999 Cadillac Seville SLS V8-4.6L VIN YSECTION Engine Mechanical Specifications
| Clearance Between Bearing and Crankshaft New Limits | 0.001 - 0.003 |
| Worn Limits (Not Over) | 0.003 |
| Diameter, Lower End (Without Bearing) | 2.249 |
| Length, Center to Center | 5.94 |
| End Play of Rods on Crank Pin | 0.008 - 0.020 |
| Bearing Material | Aluminum |
| Piston Pin Hole | 0.8662 - 0.866 |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.