Body and Frame: Specifications

1999 Cadillac Seville SLS V8-4.6L VIN YSECTION Specifications
Horns to the body 15 N.m (11 lb ft)
Taillamp to the Body 9 N.m (80 lb in)
Electronics Bay Board to the Body 5 N.m (44 lb in)
Fuel Filler Door to the Body 9 N.m (80 lb in)
Rear Compartment Lid Hinges to the Body 9 N.m (80 lb in)
Rear Compartment Lid Latch Striker to the Body 9 N.m (80 lb in)
Front Body Bracket Bolts 86 Nm (63 ft. lbs.)
Rear Body Mount Bolts 51 Nm (38 ft. lbs.)
Rear Support Assembly To Body Bolts 191 Nm (141 ft. lbs.)






RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.