Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSBUICK1998LESABRE V6-3.8L VIN KREPAIR AND DIAGNOSISSPECIFICATIONSMECHANICAL SPECIFICATIONSENGINECYLINDER BLOCK ASSEMBLYCONNECTING ROD, ENGINECONNECTING ROD DIMENSIONS
1998 Buick LeSabre V6-3.8L VIN K
Connecting Rod Dimensions
1998 Buick LeSabre V6-3.8L VIN KSECTION Connecting Rod Dimensions
Connecting Rod:
Rod Side Clearance 0.102-0.508 mm (0.004-0.0200 in)
Connecting Rod Large End Bore ID 60.295-60.312 mm (2.37378-2.3745 in)
Piston Pin Fit-in-Rod (Clearance) 0.0066 - 0.0217 mm (0.0003 - 0.0009 inch)
Rod Side Clearance 0.102-0.508 mm (0.004-0.0200 in)
Connecting Rod Large End Bore ID 60.295-60.312 mm (2.37378-2.3745 in)
Piston Pin Fit-in-Rod (Clearance) 0.0066 - 0.0217 mm (0.0003 - 0.0009 inch)
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.