Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSBUICK1996CENTURY SEDAN L4-2.2L VIN 4REPAIR AND DIAGNOSISSPECIFICATIONSMECHANICAL SPECIFICATIONSENGINECYLINDER HEAD ASSEMBLYROCKER ARM ASSEMBLYROCKER ARM NUT TORQUE
1996 Buick Century Sedan L4-2.2L VIN 4
Rocker Arm Nut Torque
1996 Buick Century Sedan L4-2.2L VIN 4SECTION Rocker Arm Nut Torque
ROCKER ARM TORQUE
^ Rocker Arms are not adjustable on this engine, tighten Rocker Arm Nuts to 30 Nm (22 lbs. ft.).
Fig. 7 Rocker Arm Cover, Rocker Arms & Pushrod Replacement:
^ Rocker Arms are not adjustable on this engine, tighten Rocker Arm Nuts to 30 Nm (22 lbs. ft.).
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.