Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSBUICK1987ELECTRA V6-231 3.8L VIN 3 FIREPAIR AND DIAGNOSISSPECIFICATIONSMECHANICAL SPECIFICATIONSALIGNMENTFRONT ALIGNMENT SPECIFICATIONS
1987 Buick Electra V6-231 3.8L VIN 3 FI
Front Alignment Specifications
1987 Buick Electra V6-231 3.8L VIN 3 FISECTION Front Alignment Specifications
Front Specs
| Caster Angle | +1.8 to +2.8 Degrees (deg) | |
| Desired Caster | 2.3 Degrees (deg) | |
| Camber Angle | Left | -1 to 0 Degrees (deg) |
| Right | 0 to +1 Degrees (deg) | |
| Desired Camber Angle | Left | -0.5 Degrees (deg) |
| Right | 0.5 Degrees (deg) | |
| Toe | - Note: Toe-in 0 deg per wheel. |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.