SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSBMW2011128I CONVERTIBLE (E88) L6-3.0L (N51)REPAIR AND DIAGNOSISTRANSMISSION AND DRIVETRAINMANUAL TRANSMISSION/TRANSAXLESERVICE AND REPAIRPROCEDURES23 .. ... UNIVERSAL BMW TRANSMISSION TAKE-UP
2011 BMW 128i Convertible (E88) L6-3.0L (N51)

23 .. ... Universal BMW Transmission Take-Up

2011 BMW 128i Convertible (E88) L6-3.0L (N51)SECTION 23 .. ... Universal BMW Transmission Take-Up



23 ... - Universal BMW transmission take-up





Special tools required:
- 00 2 030 00 2 030 Universal Hydro-Lifter Basic Unit
- 23 4 050 23 4 050 Universal Transmission Bracket





Note:
- The universal transmission bracket is introduced for the E60 AWD
- Suitable for manual and automatic transmissions





Important!
Front and rear supports (1) can be laterally adjusted by means of screws (2).
Carrier (3) of rear supports (1) can be longitudinally adjusted by means of screw.
Supports must be adapted in length and width to the transmission.





Supporting transmission:
Support transmission with special tools 23 4 050 23 4 050 Universal Transmission Bracket, 00 2 030 00 2 030 Universal Hydro-Lifter Basic Unit.

Important!
Transmission must be secured with tensioning strap (1).
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.