Trailer Hitch Control Module: Service and Repair

2006 BMW X3 (E83) (CANADA) L6-2.5L (M54)SECTION Service and Repair



61 35 000 - Removing and installing/replacing module (for trailer two hitch)





Necessary preliminary tasks:
- Remove luggage compartment floor trim panel 51 47 101 Removing and Installing/Replacing Luggage Compartment Floor Trim Panel.





Remove clips (1) and fold up front luggage compartment floor trim panel (2) slightly.

Installation:
Make sure front luggage compartment floor trim panel (2) is correctly seated.





Note:
Front luggage compartment floor trim panel shown removed for purposes of clarity.

Unfasten plug connection (1) and disconnect.

Unscrew nuts (2).
Remove module (3) in direction of arrow.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.