Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSBMW2006X3 (E83) (CANADA) L6-2.5L (M54)REPAIR AND DIAGNOSISDIAGRAMSELECTRICAL DIAGRAMSIGNITION SYSTEMIGNITION CONTROL MODULE
2006 BMW X3 (E83) (CANADA) L6-2.5L (M54)
Ignition Control Module
2006 BMW X3 (E83) (CANADA) L6-2.5L (M54)SECTION Ignition Control Module
For information regarding diagrams for this component or system, please refer to the vehicle level diagrams.
Connector Information: Additional information for the connectors shown on the diagrams can be found via the connector's number at the vehicle level connector views. Connector Views Connector Locations
Signal Information: Descriptions of signals referred to on the diagrams can be found in the Signal Glossary via the signal name at Diagram Information and Instructions. Signal Glossary
Wire Color Code Information: Wire color code information can be found at Diagram Information and Instructions. Wire Color Code Identification
Connector Information: Additional information for the connectors shown on the diagrams can be found via the connector's number at the vehicle level connector views. Connector Views Connector Locations
Signal Information: Descriptions of signals referred to on the diagrams can be found in the Signal Glossary via the signal name at Diagram Information and Instructions. Signal Glossary
Wire Color Code Information: Wire color code information can be found at Diagram Information and Instructions. Wire Color Code Identification
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.