Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSBMW2006X3 (E83) (CANADA) L6-2.5L (M54)REPAIR AND DIAGNOSISDIAGRAMSELECTRICAL DIAGRAMSACCESSORIES AND OPTIONAL EQUIPMENTMEMORY POSITIONING SYSTEMSMEMORY POSITIONING MODULE
2006 BMW X3 (E83) (CANADA) L6-2.5L (M54)
Memory Positioning Module
2006 BMW X3 (E83) (CANADA) L6-2.5L (M54)SECTION Memory Positioning Module
For information regarding diagrams for this component or system please refer to the vehicle level diagrams.
Seat and Mirror Functions
Connector Information: Additional information for the connectors shown on the diagrams can be found via the connector's number at the vehicle level connector views.
Connector Views
Signal Information: Description of signals referred to on the diagrams can be found in the signal glossary via the signal name at Diagram Information and Instructions.
Diagram Information and Instructions
Seat and Mirror Functions
Connector Information: Additional information for the connectors shown on the diagrams can be found via the connector's number at the vehicle level connector views.
Connector Views
Signal Information: Description of signals referred to on the diagrams can be found in the signal glossary via the signal name at Diagram Information and Instructions.
Diagram Information and Instructions
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.