Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSBMW2006X3 (E83) (CANADA) L6-2.5L (M54)REPAIR AND DIAGNOSISACCESSORIES AND OPTIONAL EQUIPMENTENTERTAINMENT SYSTEMSENTERTAINMENT SYSTEM CONTROL MODULESERVICE AND REPAIR
2006 BMW X3 (E83) (CANADA) L6-2.5L (M54)
Entertainment System Control Module: Service and Repair
2006 BMW X3 (E83) (CANADA) L6-2.5L (M54)SECTION Service and Repair
65 50 011 - Removing and installing (replacing) video module for on-board monitor
Important!
Read and comply with notes on protection against electrostatic damage (ESD protection) 61 35 ... Notes on ESD Protection (Electro Static Discharge).
Necessary preliminary tasks:
- Disconnect battery negative lead Instructions for Disconnecting and Connecting Battery
- Remove flap in luggage compartment panel on left Removing and Installing/Replacing Flap In Luggage Compartment Trim, Left or Right.
Unlock plug connections (1) and disconnect.
Installation Note:
Do not mix up antenna connectors (2).
Mark antenna plugs (2) and disconnect.
Release screws (3).
Release nut on stud (4).
Guide video module for on-board monitor (5) with holder over stud (4) and feed out in direction of arrow.
Release screw (1).
Unclip wiring harness (2) at point (3) and pull video module for on-board monitor (4) with holder (5) out of side recess slightly.
Feed video module for on-board monitor (4) in direction of arrow out of holder (5) and remove.
Replacement:
Carry out programming/coding Programming and Relearning.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.