EVAP System, With Fuel Tank Leak Detection Module -GX36

2025 Audi Q5 Sportback PrestigeSECTION EVAP System, With Fuel Tank Leak Detection Module -GX36
Fig 1: Identifying EVAP System Components, With Fuel Tank Leak Detection Module -GX36-
GWWA20-12124Courtesy of AUDI OF AMERICA, LLC
  1. 1 -  EVAP Canister
  2. 2 -  Bleeder Line
    • To the Fuel Tank Leak Detection Module -GX36-
  3. 3 -  Bleeder Line
    • To the EVAP Canister Purge Regulator Valve 1 -N80-
  4. 4 -  Bleeder Line
    • To Tank Switch-Off Valve -N288-
  5. 5 -  Tank Switch-Off Valve -N288-
    • Installed depending on the vehicle version
  6. 6 -  Fuel Tank Leak Detection Module -GX36-
  7. 9 -  EVAP Canister Purge Regulator Valve 1 -N80-
    • Tank Ventilation Pressure Sensor 1 -G950-
    • The Tank Ventilation Pressure Sensor 1 -G950- is installed in the breather line to the EVAP canister, depending on the emissions standard.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.