Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSAUDI2025Q5 SPORTBACK PRESTIGEREPAIR AND DIAGNOSIS (SINGLE PAGE)ENGINE PERFORMANCEENGINE CONTROL SYSTEMSCOMPONENT LOCATIONS: CONTROL MODULES IN REAR PART OF VEHICLECOMPONENT LOCATIONS: CONTROL MODULES IN REAR PART OF VEHICLEDIFFERENTIAL LOCK CONTROL MODULE -J187- COMPONENT LOCATION AND CONNECTOR END VIEWPIN ARRANGEMENTS DIFFERENTIAL LOCK CONTROL MODULE -J187
2025 Audi Q5 Sportback Prestige
Pin Arrangements Differential Lock Control Module -J187
2025 Audi Q5 Sportback PrestigeSECTION Pin Arrangements Differential Lock Control Module -J187
| -T47a- (A) | Designation | -T47a- (A) | Designation | -T47a- (A) | Designation | ||
|---|---|---|---|---|---|---|---|
| 1 | Oil Pressure/Temperature Sensor -G437- | 17 | Oil Pressure/Temperature Sensor -G437- | 33 | |||
| 2 | 18 | Oil Pressure/Temperature Sensor -G437- | 34 | ||||
| 3 | 19 | 35 | Oil Pressure/Temperature Sensor 2 -G640- | ||||
| 4 | Oil Pressure/Temperature Sensor 2 -G640- | 20 | Oil Pressure/Temperature Sensor 2 -G640- | 36 | |||
| 5 | 21 | Oil Pressure/Temperature Sensor 2 -G640- | 37 | ||||
| 6 | 22 | 38 | |||||
| 7 | 23 | 39 | |||||
| 8 | 24 | 40 | Data-Bus Wire (FlexRay-Bus) | ||||
| 9 | 25 | 41 | Data-Bus Wire (FlexRay-Bus) | ||||
| 10 | 26 | 42 | Data-Bus Wire (FlexRay-Bus) | ||||
| 11 | 27 | 43 | Data-Bus Wire (FlexRay-Bus) | ||||
| 12 | 28 | Terminal 15 | 44 | All Wheel Drive Clutch Valve 2 -N446- | |||
| 13 | All Wheel Drive Clutch Valve -N445- | 29 | 45 | All Wheel Drive Clutch Valve 2 -N446- | |||
| 14 | All Wheel Drive Clutch Valve -N445- | 30 | 46 | Terminal 30 | |||
| 15 | All Wheel Drive Pump -V415- | 31 | 47 | Terminal 31 | |||
| 16 | All Wheel Drive Pump -V415- | 32 | Oil Pressure/Temperature Sensor -G437- |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.