Parking Aid Control Module, Digital Sound System Control Module, Lane Change Assistance Control Module, Fuse Panel C

2025 Audi Q4 e-tron Premium Plus, AWDSECTION Parking Aid Control Module, Digital Sound System Control Module, Lane Change Assistance Control Module, Fuse Panel C
GWWF4B-047050424Courtesy of AUDI OF AMERICA, LLC

J446 

Parking Aid Control Module

J525 

Digital Sound System Control Module

J769 

Lane Change Assistance Control Module

J926 

Driver Side Rear Door Control Module

SC 

Fuse Panel C

SC10 

Fuse 10 (On Fuse Panel C)

SC11 

Fuse 11 (On Fuse Panel C)

SC13 

Fuse 13 (On Fuse Panel C)

SC14 

Fuse 14 (On Fuse Panel C)

SC17 

Fuse 17 (On Fuse Panel C)

T8j 

8-Pin Connector, Black

T20g 

20-Pin Connector, White

T26e 

26-Pin Connector, Black

T27a 

27-Pin Connector, Black

T27b 

27-Pin Connector, Black

T38a 

38-Pin Connector, Black

TTHL 

Left Rear Door Coupling Point

B318 

Positive Connection 4 (30a) (in Main Wiring Harness)

B324 

Positive Connection 10 (30a) (in Main Wiring Harness)

Refer to Applicable Sound System Wiring Diagram

*2 

For Vehicles with an Amplifier

*3 

Refer to Applicable Driver Door Control Module Wiring Diagram

*4 

Refer to Wiring Diagram for Parking Aid

*5 

Refer to Applicable Lane Change Assistance Wiring Diagram

*6 

For Vehicles with Lane Change Assistance

*7 

For Vehicles with Trailer Setup

*8 

For Vehicles with Trailer Socket

*9 

For LHD Vehicles

*10 

For RHD Vehicles

*11 

From June 2023

*12 

For Vehicles Without Memory Function

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.