00 General, Technical Data: Tools: Notes

2025 Audi Q4 e-tron Premium Plus, AWDSECTION Notes

Special tools and workshop equipment required 

  • Resistance Spot Welder :VAS 6530A 
  • Resistance Spot Welder :VAS 6545A 
  • Resistance Spot Welder : VAS 6755 
  • Resistance Spot Welder :VAS 821 101 
  • Resistance Spot Welder :VAS 821 201 
  • Gas-Shielded Welder 195A :VAS 6044A 
  • Gas-Shielded Welder :VAS 6045A 
  • Gas-Shielded Welder :VAS 821 001 
  • Gas-Shielded Welder :VAS 821 003 
  • Gas-Shielded Welder :VAS 821 005 
  • Welding Tool :V.A.G 1959A 
  • Measuring and Alignment System :VAS 6526  Basic
  • Measuring and Alignment System - Professional :VAS 6527 
  • Measuring and Alignment System - Professional Plus :VAS 6528 
  • Pneumatic Brush Grinder Set :VAS 6446 A 
  • Flat Blade Scraper :VAS 5448 
  • Pneumatic Edge Milling Unit :VAS 882 005 
  • Tin Snips :VAS 5356 
  • Tin Snips - Right Handed :VAS 5357 
  • Angle Grinder :VAS 5167B 
  • Belt Sander :VAS 881 003 
  • Belt Sander :VAS 881 003A 
  • Pneumatic Gun - 18 Bar :VAS 6648 
  • Drill - 1100 Watt :VAS 6267 A 
    Fig 1: 1100 Watt Drill (VAS6267 A)
    GWWW00-11779Courtesy of AUDI OF AMERICA, LLC
  • Spot Weld Breaker :VAS 6322A 
    Fig 2: Spot Weld Breaker (VAS6322 A)
    GWWW00-10964Courtesy of AUDI OF AMERICA, LLC
  • Spot Weld Breaker :VAS 882 001 
  • Double Cartridge Adhesive Gun :VAS 5237 
    Fig 3: Double Cartridge Adhesive Gun (VAS5237)
    GWWW00-1122Courtesy of AUDI OF AMERICA, LLC
  • Pneumatic Adhesive Gun :VAS 6453USUS 
  • Window Cutter :V.A.G 1561B 
  • Telescoping Gauge - 41.5-92.5cm :VAS 5159  or Telescoping Gauge - 92-260cm :VAS 5160 
    Fig 4: Alignment Bracket Set -- VAS5160
    GWWW00-10624Courtesy of AUDI OF AMERICA, LLC
  • Mechanical Door Brace :V.A.G 1438 
    Fig 5: Door Brace (V.A.G 1438)
    GWWW00-1030Courtesy of AUDI OF AMERICA, LLC
  • Pneumatic Adhesive Gun :V.A.G 2005 B 
    Fig 6: Compressed Air - Glue Gun VAG 2005
    GWWW00-1000Courtesy of AUDI OF AMERICA, LLC
  • Hand Cartridge Gun :VAS 5155 
    Fig 7: Hand Cartridge Gun (VAS5155)
    GWWW00-10699Courtesy of AUDI OF AMERICA, LLC
  • Double Suction Lifter :V.A.G 1344  or Installation Magnets :VAS 6739 
    Fig 8: Double Suction Lifter
    GWWW00-0530Courtesy of AUDI OF AMERICA, LLC
  • Installation Magnets :VAS 6739 
  • Adjustment Gauge :3371 
    Fig 9: 3371 Special Tool
    GWWW00-0190Courtesy of AUDI OF AMERICA, LLC
  • Pneumatic Cartridge Gun :V.A.G 1761/1 
    Fig 10: Compressed Air Gun (V.A.G 1761/1)
    GWWW00-1032Courtesy of AUDI OF AMERICA, LLC
  • Tensioning Strap :T10038 
    Fig 11: Identifying Special Tools -- Tensioning Belt T10038
    GWWW00-1005Courtesy of AUDI OF AMERICA, LLC
  • Cartridge Heater :V.A.G 1939A 
    Fig 12: Cartridge Heater
    GWWW00-1288Courtesy of AUDI OF AMERICA, LLC
  • Aluminum Tool Set :V.A.G 2010/2A 
  • Collision Tool Trolley :V.A.G 2010/2A-1 
  • Torque Wrench 1783 - 2-10 Nm :V.A.G 1783 
  • Torque Wrench, 6-50 Nm :V.A.G 1331A 
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.