Check And Adjustment Values

2025 Audi Q4 e-tron Premium Plus, AWDSECTION Check And Adjustment Values
  • 46 - Front Brakes/Rear Brakes

46 - Front Brakes/Rear Brakes

Fig 1: Brake Rotor And Brake Pad, Wear Specifications
GWWN00-000276Courtesy of AUDI OF AMERICA, LLC

Front axle brake rotors wear specifications -1-

Diameter -a- Wear specification -b-
330 mm 21.5 mm
340 mm 25.5 mm
358 mm 28.5 mm

Front axle brake pad wear specification -2-

Wear specification -c-
2 mm.
Fig 2: Drum Brakes
GWWE00-11638Courtesy of AUDI OF AMERICA, LLC

Rear axle brake pad/brake drum wear specification -1-

Brake drum new part diameter -3- Brake drum permissible wear -3-
279.8 mm 280.8 mm

Rear axle brake pad wear specification -2-

Wear specification -2-
1 mm
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.