Engine Performance And Maintenance: Tubes

2025 Audi Q3 PremiumSECTION Tubes
Condition Code Procedure
Application incorrect B Require replacement
Application incorrect B Require replacement
At or beyond service interval 3 Suggest replacement
At or beyond service interval 3 Suggest replacement
Connected incorrectly A Require repair
Connected incorrectly A Require repair
Corroded, not reusable 1 Suggest replacement
Corroded, not reusable 1 Suggest replacement
Cracked B Require replacement
Cracked B Require replacement
Dry-rotted 1 Suggest repair or replacement
Dry-rotted 1 Suggest repair or replacement
Hard 1 Suggest repair or replacement
Hard 1 Suggest repair or replacement
Inner fabric (webbing) damaged A Require replacement
Inner fabric (webbing) damaged A Require replacement
Insufficient clamping force, allowing hose to leak A Require repair or replacement
Insufficient clamping force, allowing hose to leak A Require repair or replacement
Leaking A Require repair or replacement
Leaking A Require repair or replacement
Melted 1 Suggest repair or replacement
Melted 1 Suggest repair or replacement
Missing C Require replacement
Missing C Require replacement
Outer covering damaged 1 Suggest replacement
Outer covering damaged 1 Suggest replacement
Outer covering damaged to the extent that the inner fabric is visible A Require replacement
Outer covering damaged to the extent that the inner fabric is visible A Require replacement
Protective sleeves damaged 2 Suggest replacement of sleeves
Protective sleeves damaged 2 Suggest replacement of sleeves
Protective sleeves missing C Require replacement of sleeves
Protective sleeves missing C Require replacement of sleeves
Restricted, affecting performance A Require repair or replacement
Restricted, affecting performance A Require repair or replacement
Restricted, not affecting performance 2 Suggest repair or replacement
Restricted, not affecting performance 2 Suggest repair or replacement
Routed incorrectly (where failure is likely to occur) B Require repair or replacement
Routed incorrectly (where failure is likely to occur) B Require repair or replacement
Safety clip missing C Require replacement
Safety clip missing C Require replacement
Spongy 1 Suggest repair or replacement
Spongy 1 Suggest repair or replacement
Stripped A Require replacement
Stripped A Require replacement
Swollen B Require replacement
Swollen B Require replacement
Threads damaged A Require repair or replacement
Threads damaged A Require repair or replacement
Threads stripped (threads missing) A Require replacement
Threads stripped (threads missing) A Require replacement
Type incorrect 2 Suggest repair or replacement
Type incorrect 2 Suggest repair or replacement
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.