Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Straightening Rack: Notes
The item numbers in the illustrations are identical to the end numbers on the alignment bracket mountings.
The item numbers are circled for the alignment bracket mountings for the body with and without the assemblies.
The required basic set size is indicated for the alignment bracket mountings.
Wrench - Oil Filter :VAS 6752
Portal Gauge Supplement Audi Q3 :VAS 5007/64
-- Refer to assembly plan supplied with alignment bracket set for detailed information on the assembly.
Or:
Measuring And Alignment System w/Wall System :VAS 6526
Measuring and Alignment System - Professional :VAS 6527
Measuring and Alignment System - Professional Plus :VAS 6528
Measuring System - Spanesi :VAS 811 019 basic
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.