Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Left/Right Peripheral Camera -R244- / -R245-, Removing And Installing: Removing
- Component location. Refer to COMPONENT LOCATION OVERVIEW - SENSORS AND CONTROL MODULES IN CENTER SECTION OF VEHICLE .
-- Remove the Driver and Front Passenger Exterior Rearview Mirror Turn Signal Bulb -L131- / -L132-. Refer to DRIVER AND FRONT PASSENGER EXTERIOR REARVIEW MIRROR TURN SIGNAL BULB -L131- / -L132-, REMOVING AND INSTALLING .
-- Release and disconnect the connector -1-.
-- Remove the bolts -arrows-.
-- Remove the peripheral camera -2- with the bracket from the exterior rearview mirror.
-- Remove the peripheral camera from the bracket.
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.