Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSAUDI2025Q3 PREMIUM PLUSREPAIR AND DIAGNOSISENGINE PERFORMANCEFUEL DELIVERYFUEL SUPPLY20 FUEL SUPPLYACCELERATOR MECHANISMOVERVIEW - ACCELERATOR PEDAL MODULE
2025 Audi Q3 Premium Plus
Overview - Accelerator Pedal Module
2025 Audi Q3 Premium PlusSECTION Overview - Accelerator Pedal Module
- Bolt
- 6 Nm
- Connector
- Make sure it is attached securely
- Accelerator Pedal Module -GX2-
- with
- Accelerator Pedal Position Sensor -G79-
- Accelerator Pedal Position Sensor 2 -G185-
- Check using the Vehicle diagnostic tester .
- Removing and Installing. Refer to Accelerator Pedal Module -GX2-, REMOVING AND INSTALLING .
- Depending on the engine/transmission combination, an adaptation must be performed after replacing.
- If a corresponding menu item is in the engine electronics tree structure under "functions", perform the adaptation using the Vehicle diagnostic tester .
- with
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.