Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSAUDI2025Q3 PREMIUM PLUSREPAIR AND DIAGNOSISELECTRICALGAUGESINSTRUMENTS90 INSTRUMENTSINSTRUMENT CLUSTEROVERVIEW - INSTRUMENT CLUSTER
2025 Audi Q3 Premium Plus
Overview - Instrument Cluster
2025 Audi Q3 Premium PlusSECTION Overview - Instrument Cluster
- Instrument Cluster - Low
- With Instrument Cluster Control Module -J285-
- Do not disassemble
- If faulty replace the instrument cluster
- Removing and Installing. Refer to INSTRUMENT CLUSTER WITH Instrument Cluster Control Module -J285-, REMOVING AND INSTALLING .
- Connector
- For the instrument cluster
- Fiber Optic Cable Connector
- Seal with Fiber-Optic Repair Set - Connector Protective Caps :VAS 6223/9
- Bolt
- Quantity: 2
- 2.5 Nm
- Instrument Cluster - High
- With Instrument Cluster Control Module -J285-
- Do not disassemble
- If faulty replace the instrument cluster
- Removing and Installing. Refer to INSTRUMENT CLUSTER WITH Instrument Cluster Control Module -J285-, REMOVING AND INSTALLING .
- Antenna Wire
- Instrument Cluster - High
- Fiber Optic Cable Connector
- Seal with Fiber-Optic Repair Set - Connector Protective Caps :VAS 6223/9
- Clip
- No replacement part
- Connector
- For the instrument cluster
- Instrument Cluster Trim
- Removing and Installing. Refer to INSTRUMENT CLUSTER TRIM, REMOVING AND INSTALLING .
- Bolt
- Quantity: 2
- Tightening specification. Refer to OVERVIEW - INSTRUMENT PANEL .
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.