Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Battery Cables
2025 Audi A6 allroad Premium PlusSECTION Battery Cables
| Condition | Code | Procedure |
|---|---|---|
| Application incorrect | B | Require repair or replacement |
| Attaching hardware broken | A | Require repair or replacement of hardware |
| Attaching hardware missing | C | Require replacement of hardware |
| Attaching hardware not functioning | A | Require repair or replacement of hardware |
| Connector broken | A | Require repair or replacement |
| Connector melted | A | Require repair or replacement |
|
NOTE:
Determine cause and correct prior to repair or replacement of part.
|
||
| Connector missing | C | Require replacement |
| Insulation damaged, conductors exposed | A | Require repair or replacement |
|
NOTE:
Exposed conductor at replacement (aftermarket) terminal end does not require repair or replacement.
|
||
| Insulation damaged, conductors not exposed | 1 | Suggest replacement |
| Open | A | Require repair or replacement |
| Protective shield (conduit) melted | 2 | Suggest repair or replacement |
|
NOTE:
Determine cause and correct prior to repair or replacement of part.
|
||
| Protective shield (conduit) missing | C | Suggest repair or replacement |
| Resistance (voltage drop) out of specification | A | Require repair or replacement |
| Routed incorrectly | B | Require repair |
| Secured incorrectly | B | Require repair |
| Shorted | A | Require repair or replacement |
| Terminal broken | A | Require repair or replacement |
| Terminal burned, affecting performance | A | Require repair or replacement |
|
NOTE:
Determine cause and correct prior to repair or replacement of part.
|
||
| Terminal burned, not affecting performance | 2 | Suggest repair or replacement |
| Terminal corroded, affecting performance | A | Require repair or replacement |
| Terminal corroded, not affecting performance | 2 | Suggest repair or replacement |
| Terminal loose, affecting performance | B | Require repair or replacement |
| Terminal loose, not affecting performance | 1 | Suggest repair or replacement |
| Voltage drop out of specification | A | Require repair or replacement |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.