Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSAUDI2025A6 ALLROAD PREMIUM PLUSREPAIR AND DIAGNOSISGENERAL INFORMATIONBRAKESMAP - ROUTINE INSPECTION REFERENCE GUIDEROUTINE INSPECTION REFERENCE GUIDEROUTINE INSPECTION - UICSBRAKE SYSTEMSHOSES
2025 Audi A6 allroad Premium Plus
Brake Systems: Hoses
2025 Audi A6 allroad Premium PlusSECTION Hoses
| Condition | Code | Procedure |
|---|---|---|
| Attaching hardware broken | A | Require repair or replacement of hardware |
| Attaching hardware missing | C | Require replacement of hardware |
| Attaching hardware not functioning | A | Require repair or replacement of hardware |
| Blistered | B | Require replacement |
| Expansion affecting performance | A | Require Replacement |
| Fitting threads damaged | A | Require repair or replacement |
| Fitting threads stripped (threads missing) | A | Require replacement |
| Incorrectly secured | B | Require repair |
| Inner fabric (webbing) cut | B | Require replacement |
| Leaking | A | Require replacement |
| Missing | C | Require replacement |
| Outer covering is cracked to the extent that inner fabric of hose is visible | B | Require replacement |
| Restricted | A | Require replacement |
| Routed incorrectly | B | Require repair |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.