Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Information Electronics Control Module 1, Android Operating System Control Module, Fuse Panel C
J794
Information Electronics Control Module 1
J1243
Android Operating System Control Module
SC
Fuse Panel C
SC2
Fuse 2 (On Fuse Panel C)
T5ee
5-Pin Connector, Yellow
T9r
9-Pin Connector, Blue
T12ab
12-Pin Connector, Green
379
Ground Connection 14 (in Main Wiring Harness)
380
Ground Connection 15 (in Main Wiring Harness)
687
Ground Connection 1 on Center Tunnel
688
Ground Connection 2 on Center Tunnel
A264
Connection 1 (5V) (in Instrument Panel Wiring Harness)
B169
Positive Connection 1 (30) (in Interior Wiring Harness)
*
Refer to Applicable Wiring Diagram for Fuse Positions
*2
For LHD Vehicles
*3
Depending on Equipment
*4
For RHD Vehicles
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.