Pin Arrangements Data Bus On Board Diagnostic Interface -J533

2025 Audi A4 allroad Premium PlusSECTION Pin Arrangements Data Bus On Board Diagnostic Interface -J533
-T54- (A) Designation   -T54- (A) Designation   -T54- (A) Designation
1     19     37  
2     20     38  
3 Diagnostic connection -U31- / FlexRay-Bus   21 Diagnostic connection -U31- / FlexRay-Bus   39  
4 Diagnostic connection -U31-   22 Diagnostic connection -U31-   40  
5 All-Wheel Drive Control Module -J492- / FlexRay-Bus   23 All-Wheel Drive Control Module -J492- / FlexRay-Bus   41 All-Wheel Drive Control Module -J492-
6     24     42 All-Wheel Drive Control Module -J492-
7 Distance Regulation Control Module 2 -J850- / FlexRay-Bus   25 Distance Regulation Control Module 2 -J850- / FlexRay-Bus   43  
8 Airbag Control Module -J234- / FlexRay-Bus   26 Airbag Control Module -J234- / FlexRay-Bus   44  
9 FlexRay-Bus/automatic transmission   27 FlexRay-Bus/automatic transmission   45 FlexRay-Bus for driver assistance systems, level control system
10 Engine Control Module (ECM) -J623- / FlexRay-Bus   28 Engine Control Module (ECM) -J623- / FlexRay-Bus   46 FlexRay-Bus for driver assistance systems, level control system
11  

B229 

  29  

B230 

  47  
12 Extended System CAN-Bus High   30 Extended System CAN-Bus Low   48 CAN-Bus diagnostic Low
13 CAN-Bus Infotainment, High   31 CAN-Bus Infotainment, Low   49 CAN-Bus diagnostic High
14     32     50 Front A/C display control head -E87- / CAN-Bus Low
15 Comfort System CAN-Bus High   33 Comfort System CAN-Bus Low   51 Front A/C display control head -E87- / CAN-Bus High
16 LIN-Bus   34 LIN-Bus   52  
17 Terminal 15   35     53  
18 Terminal 30   36 Diagnostic connection -U31-   54 Terminal 31
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.