Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Secondary Air Injection
Additionally injecting air into the exhaust pipe triggers an exothermic (release of heat) reaction. This leads to the combustion of HC and CO components that prevail mainly during the warm up phase. This oxidation process releases additional heat. Consequently, the exhaust gas becomes hotter, causing the catalytic converter to heat up at a faster rate. For spark-ignition engines, secondary-air injection is an effective means of reducing HC and CO emissions after starting the engine and to rapidly heat up the catalytic converter. This ensures that the conversion of NOx emissions commences earlier.
An electronically controlled valve operates the secondary-air valve (a one-way check valve). The ECM actuates the pump and the control valve, ensuring that secondary air can be injected at a defined point in time. The secondary air must also be injected as close to the outlet valve as possible in order to exploit the high temperatures to utilize the exothermic (release of heat) reaction effectively.
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.