Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSAUDI2025A4 QUATTRO PRESTIGEREPAIR AND DIAGNOSISSUSPENSIONELECTRONIC SUSPENSIONLEVEL CONTROL SYSTEM43 LEVEL CONTROL SYSTEMDYNAMIC RIDE CONTROL (DRC)OVERVIEW - FRONT SHOCK ABSORBERS
2025 Audi A4 Quattro Prestige
Overview - Front Shock Absorbers
2025 Audi A4 Quattro PrestigeSECTION Overview - Front Shock Absorbers
- Hose/Line Assembly
- With extract/fill valve
- Union bolt, 14 Nm
- Nut
- 9 Nm
- Bracket
- Spring
- Replace if damaged
- Hydraulic Line
- Union bolt, 14 Nm
- Connecting Piece
- Hydraulic Line
- Union bolt, 14 Nm
- DRC Shock Absorber
- Removing and Installing. Refer to SUSPENSION STRUT, REMOVING AND INSTALLING .
- Protective Dust Cap
- 1.5 Nm
- Spring
- Replace if damaged
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.